The DisPo Powder Dispensing System is capable of transferring between 100 micrograms and 20 milligrams of powder per transfer. The system can sample from vials, microwell plates, tubes, and other custom sources. Individual discrete masses are transformed by a combination of sample probes; each probe is capable of a limited range of masses. The minimum required mass of powder for sampling is 5 milligrams. Although powder dependent, typical dispense precision is ~10% CV for a wide range of powder types. Cycle time for dispensing is ~30 sec/dispense.
- About Us
-
Applications
Applications
-
Lateral Flow
Type
- Batch Processing
Lateral Flow: BatchLateral Flow Immunoassays are used by point-of-care markets for immunological testing. Examples of utilization of immunoassays include cholesterol... - In Line Processing
Lateral Flow: In LineLateral Flow Immunoassays are used by point-of-care markets for immunological testing. Examples of utilization of immunoassays include cholesterol...
- Batch Processing
-
BioSensor
Type
- Glucose
GlucoseFollowing advances in microelectronics, biosensor designs are becoming increasingly complex, and focused on miniaturization. The demand for simultaneous measurement of multiple... - Microfluidics
MicrofluidicsFollowing advances in microelectronics, biosensor designs are becoming increasingly complex, and focused on miniaturization. The demand for simultaneous measurement of multiple...
- Glucose
-
BioChips
BioChipsThe development of manufactured protein arrays is currently getting a lot of visibility due to the existence of an immense field of applications, including biosensors, diagnostics... -
Flow Through
Flow ThroughFlow Through and Lateral Flow diagnostic devices both use membranes as the active media on which the relative biomarkers are printed and the assay is executed. -
Dry Chemistry
Dry ChemistryDry Chemistry (also known as Dip Stick) refers to a diagnostic format where a test pad is bonded to a support structure such as a plastic strip for ease of handling... -
Solid Transferring
Solid TransferringBioDot's Dispo solid transfer technology provides the ideal solution to the challenges of transferring materials in the solid state. -
Immunoblots
ImmunoblotsImmunoblotting (alternatively, Western blot, line-ELISA, dot-blot or cold-blot) is an analytical technique used to detect specific proteins in a patients' sample.
-
qPCR
qPCRRT-qPCR analysis of genomic and genetic samples has become a standard in genetic research and diagnostics.
-
FISH
FISHThe BioDot automation and dispensing technology have been demonstrated to enable sample and probe multiplexing along with miniaturizing sample volumes, thereby reducing costs, increasing...
-
Lateral Flow
-
Technologies
Technologies
-
Liquid Dispensing
Liquid DispensingOur non-contact and contact technology dispenses with a high dynamic volume range (picoliter to microliter) and can accurately aspirate and dispense aqueous and organic solutions as well as living cells. -
Solid Transfer
Solid TransferBioDot's Dispo solid transfer technology provides the ideal solution to the challenges of transferring materials in the solid state.
-
Cutting/Slitting
Cutting/SlittingGuillotine cutting technology is designed to provide robustness, flexibility and precision in both R&D and high volume manufacturing environments. -
In Line Processing
In Line ProcessingOur state-of-the-art In Line processing is designed to provide reagent application and drying capabilities for web processing.
- In Line Degassing
-
Lamination
LaminationOur laminating systems are a modular design to accommodate various numbers and types of materials. - Process Controls
-
Liquid Dispensing
-
Products
Product Categories
-
Lateral Flow
Type
-
Batch Processing
Application
-
Dispensing
Product Name
-
ZX1010 Platform
ZX1010 PlatformWith a pneumatic Z, manual Y-axis, 450mm x 70mm dispense area, includes HHT control, simultaneous dispensing, ZX1010 with 2 FrontLine Dispensers, ZX1010 with 2 FrontLine Dispensers and 1 AirJet 3000 Quanti. -
XYZ Platforms
XYZ PlatformsXYZ3060 Platform with a motor Z-axis, 450mm x 70mm dispense area, HHT control, simultaneous dispensing. XYZ3210 Platform with a motor XYZ, 450mm x 260mm dispense area, HHT control, simultaneous dispensing.
-
ZX1010 Platform
-
Cutting/Slitting
Product Name
- CM4000 Guillotine
-
RCC4000 Batch Cutting System
RCC4000 Batch Cutting SystemThe Rotary Card Cutter is a compact system designed for fast cutting of paper, assembled cards, or other diagnostic materials. -
SM5000 Sheet Slitter
SM5000 Sheet SlitterBioDot's SM5000 Sheet Slitting Module is a robust, automatic slitting system used to cut sheet material into smaller widths. Cut width, cut speed and number of cuts are easily programmed through BioDot's handheld terminal.
- Laminating
-
Dispensing
-
In Line Processing
Application
- Dispensing
-
Cutting/Slitting
Product Name
-
RCC4000 Rotary cutter
RCC4000 Rotary cutter, take-up reels (each)The Rotary Card Cutter is a compact system designed for fast cutting of paper, assembled cards, or other diagnostic materials.
-
RSS5000 Rotary Slitter
RSS5000 Rotary SlitterThe Rotary Slitter is a high-speed precision slitting instrument used to slit web materials up to 300 mm in width into thin webs down to 5 mm in width. The minimum cut width will be application limited. The slit webs are collected in roll formats on take-up reels.
-
RCC4000 Rotary cutter
-
Laminating
Product Name
-
LM8010 & LM8020
LM8010 & LM8020Reel Feed of Plastic Backing Magazine Strip Feed of Plastic Backing Material Feed of Roll Stock with Take-up Liners (3 materials) Magazine feed of Strip Format Materials Membrane Feed with Take-up Liner Material Feed of Roll Stock with ...
-
LM8010 & LM8020
-
Batch Processing
-
BioSensor
Type
-
Aspirate/Dispense
Product Name
-
AD3200
AD3200AD3200 Dispensing Platform (motor X, Y, and Z-Axis), One Nest choice, AxSys Software Control, PC Control Workstation. -
AD3400
AD3400An overhead gantry XYZ system with stationary mechanical nest (300 mm x 600 mm), chassis and PC controller. -
AD6000
AD6000An overhead gantry XYZ system with stationary mechanical nest (600 mm x 600 mm), chassis and PC controller.
-
AD3200
-
Cutting
Product Name
-
RCC4000 Rotary cutter
RCC4000 Rotary cutter, take-up reels (each)The Rotary Card Cutter is a compact system designed for fast cutting of paper, assembled cards, or other diagnostic materials.
-
RSS5000 Rotary Slitter
RSS5000 Rotary SlitterThe Rotary Slitter is a high-speed precision slitting instrument used to slit web materials up to 300 mm in width into thin webs down to 5 mm in width. The minimum cut width will be application limited. The slit webs are collected in roll formats on take-up reels.
- CM4000 Guillotine
-
RCC4000 Rotary cutter
-
Aspirate/Dispense
-
Solid Transfer
Type
-
Automated Powder Dispensing System
Product Name
-
DisPo1500, 3400 and 6000
DisPo1500, 3400 and 6000Motorized X, Y, and Z axes, 300mm x 200mm dispense area, choice of source and destination vessels, AxSys Software with PC Workstation.
-
DisPo1500, 3400 and 6000
-
Handheld Powder Dispensing System
Product Name
-
Powder Dispenser FV Starter Kit
Powder Dispenser FV Starter KitDisPo Fixed Mass Powder Dispensing Kit. Complete Fixed Mass Powder Dispensing Kit from BioDot.
-
Powder Dispenser FV Starter Kit
-
Automated Powder Dispensing System
-
BioChip
Type
-
Aspirate/Dispense
Product Name
-
AD1500
AD1500AD1500 Aspirate and Dispense Platform (motor X, Y and Z-axes), One Nest Choice, AxSys Software Control, PC Control Workstation
-
AD3400
AD3400An overhead gantry XYZ system with stationary mechanical nest (300 mm x 600 mm), chassis and PC controller.
-
AD6000
AD6000An overhead gantry XYZ system with stationary mechanical nest (600 mm x 600 mm), chassis and PC controller.
-
AD1500
-
Readers
Product Name
-
A2 MicroArray System
A2 MicroArray SystemThe A2 MicroArray System offers the power of a high-throughput multiplex assay. It features fully integrated software with triplicate results on 13 analytes in 96 wells reported within five minutes of read.
-
A2 MicroArray System
-
Aspirate/Dispense
- Flow Through
-
Immunoblot
Type
-
Dispensing
Product Name
-
XYZ3210
XYZ3210XYZ3210 Platform with a motor XYZ, 450mm x 260mm dispense area, HHT control, simultaneous dispensing. The XYZ3210 has all the features of the XYZ3060 plus a larger working area for larger membranes. -
AD3200
AD3200AD3200 Dispensing Platform (motor X, Y, and Z-Axis), One Nest choice, AxSys Software Control, PC Control Workstation.
-
XYZ3210
-
Cutting
Product Name
-
Dispensing
-
Lateral Flow
- Resource Center
- Service & Support
- News & Events
- Contact